|
|
Toothed-roll crusher (DShZ) is designed for crushing rock mass with a maximum piece size up to 1600 mm (compressive strength is not more than 180 MPa) into pieces of 300 mm in size. This crusher works in the following way: large pieces of material pass between two rolls of the crusher, are being entrained by them and crushed to the required size. Advantage:
the teeth are spirally disposed on the working faces of rolls so that they are able to crush very large pieces without need to increase the drive power. .bmp)
Performance specifications | Values | DGSh-100 | DGSh-200 | DGSh-300 | DGSh-600 | DGSh-900 | DGSh-1500 | | Capacity, t/h | 50 | 100 | 150 | 500 | 1000 | 1500 | | Feed size, mm | 100–150 | 200–250 | 300–350 | 600 | 900 | 1500 | | Size of the crushed product, mm | 50–60 | 70–80 | 80–90 | 90–150 | 200–400 | 300–600 | | Overall dimensions, mm Width Length Height | 1,5 3,0 1,1 | 1,7 3,5 1.3 | 1,8 3,8 1,4 | 2,1 4,2 1,6 | 2,8 5,2 2,3 | 3,3 6,0 3,1 | | Drive power, kW | 30 | 45 | 55 | 120 | 250 | 350 | | Weight, t | 15 | 20 | 25 | 30 | 60 | 100 | 
|
|
